Results 1 to 10 of 13
Thread: boggs bat?
Hybrid View
-
05-19-2008, 07:22 PM #1
boggs bat?
mike and or brian;
what is the difference between a C235C and C235L? i won one from the 86-89 period and the barrel label is C235? since i don't have it yet, it is either 34 or 34.5. i will assume C is for cupped?
-
05-20-2008, 03:47 PM #2
- Join Date
- Oct 2005
- Posts
- 1,349
Re: boggs bat?
Here is some info on Boggs use of model C235 bats during the 1986-89 H & B labeling period.
1) all model C235 bats that did not have cupped ends were not sent to Boggs for his professional use during that labeling period. All were sent to various promotional companies, including Anaconda-kaye, Hamps Coins & Stamps, Gale Ward Athletics, etc. These bats were sent in lengths of both 34 inches and 34.5 inches.
2) All model C235 bats during that l;abeling period that were sent to Boggs for his personal use had a cupped barrel end, and are designated as such (C235C) in the H & B records. These bats were sent in lengths of 34 inches (about 5%) and 34.5% (about 95%.) However, some cupped end bats were sent to promotional companies as well.
3) For a cupped end signature model C235C Boggs bat from the 1986-89 labeling, the presence of key Boggs individual player characteristics is necessary. Post a photo of the bat, along with the dimensions, etc when it arrives and Jim Caravello will be able to help you out further.
$) For the record--
model C235 indicates that the bat was the 235th model variation that was made for a player whose last name began with the letter C after this identification system was put into place in the early 1940s.
C235C desinates a model C235 bat with a cupped end
C235L designates a model C235 bat with a Large (or Ruth) knob.
Good Luck
Mike Jackitout7@aol.com
-
05-20-2008, 04:18 PM #3
Re: boggs bat?
then i got screwed!
i bought it from b&e as a gamer. caked tar like i have seen on his bats and old #26 on knob. i emailed them prior to buying but never got a reply regarding length! damn!
-
05-20-2008, 04:24 PM #4
Re: boggs bat?
these are the pics from b&e. it clearly shows an uncupped end.
-
05-20-2008, 04:32 PM #5
Re: boggs bat?
from what i see in the records, he ordered uncupped models prior to 86. so from what i see, this bat obviously from 86-89, but i can't make out if the end is cupped?
-
05-20-2008, 06:18 PM #6
- Join Date
- Oct 2005
- Posts
- 1,349
Re: boggs bat?
Here are Boggs' earlier (pre-1986) C235 uncupped Flame Treated Finish orders:
2/9/83 -- 34.5 inches --6 bats
1/22/85-- 34 inches--6 bats
Here are the documented C235 Flame Treated Finish bats from 1986-89 period:
11/9/87 34 in-- 2 bats -- BB Promotions
1/20/88--34 in -- 1 bat-- BB Promotions
6/21/89--34.5 in--72 bats--Anaconda-Kaye
8/4/89--34.5 in--48 bats--Anaconda-Kaye
9/20/89--34 in--2 bats--BB Promotions11/30/89-- 34.5 in --slight FT--3 bats--BB Miscellaneous
Remember two other things also-- C235 is a Boggs Pro Stock model, so numerous uncupped C235 bats could have been ordered by any team (team index bats) and been used by any player in the organization, including Boggs. Also, bats were sent to Anaconda-Kaye and other promotional companies (as well as minor league teams) into the 1990's with 1986-89 H & B labeling on them.
When the bat arrives, post the length, a close-up of the handle tar pattern, and a close-up of the number on the knob and get Jim's input.
Mike Jackitout7@aol.com