Jersey Display Cases

[skyking26]

Thought you might be interested in seeing the Profile display cases my Co. is about to market. The pat. pend. design is a full view curved glass and cabinet that allows a specially designed body form to show jersey front or back. Like your oppinions.

As I mentioned, very attractive. However, received pricing and at near $700 a case I'll have to pass!!!

[kylehess10]

As I mentioned, very attractive. However, received pricing and at near $700 a case I'll have to pass!!!

$700????? I'm sure we all here could get another nice piece to our collections for that amount. I'm sure there's a way we could build one of those cases for a fraction of the cost. Doesn't seem like too much costs in supplies would be needed; which is why I always BUILD my cases and holders

[thegoalie]

To hang my jerseys, I use a bent 1/4" aluminum round bar from Home Depot and a picture hanger hook. Total cost: About $3.50! They look great on the wall.

[BIGSTIG]

Her is what I do -

Walmart 5 shelf bookshelf natural or black mearures 19 1/2 X 72

Do not put in the upper shelf, and use that part to hang a jersey. That part measures (the inside) 28 1/2 X 39. To hang the jersey I have been using hangers, but now that thegoalie has posted I will be borrowing his idea thanks!!

As you can see more than enough room for a jersey, bat glove, cleats 8 X 10 photo etc.

Also you can choose to add plexiglass as I have on the Dawson, and now that I see how easy & cheap it is will be doing for all the rest of my "lockers" (if you are only buying one you will need to buy a 36 x 48 and cut down) (if you are going to need 5 or more you can special order a 5 pack which will be a lot cheaper and 32 X 40 - so not as much waste)

All you need to buy is velcro and put it in all 4 corners and in the middle on the top & bottom. This way you can remove the plexiglass when you want to add something.



Cost = CHEAP!! Shelf = $27.00 / Plexiglass = $15.00 / Velcro = $17.00 a roll (you can do 10 of these with one 15ft roll)

Total per unit = appx $45.00 + tax

Time = 45 minutes per
Look = AWESOME - (well not as cool as harpts - but works for me)

[harpt]

Look = AWESOME

I agree...this does look awesome

[cigarman44]

Hey Bigstig,

Where do you get the plexiglass?

Thanks!

Joe

[BIGSTIG]

Joe -

Plexiglass was bought at Home Depot. You can purchase a single sheet which measures 36 X 48 for $23.00 and cut it down (which I did to see how it would work) but then I ordered a 5 pack and that comes 32 X 40 for $79.97 (so $15.00 each) which you still have to cut off 2 inches, but alot cheaper and less waste. Hope that helps

BIGSTIG

[metsbats]

Joe -

Plexiglass was bought at Home Depot. You can purchase a single sheet which measures 36 X 48 for $23.00 and cut it down (which I did to see how it would work) but then I ordered a 5 pack and that comes 32 X 40 for $79.97 (so $15.00 each) which you still have to cut off 2 inches, but alot cheaper and less waste. Hope that helps

BIGSTIG

BIGSTIG,

Great displays! THanks for sharing.

What do you use to cut plexiglass?

Thanks
David

[costas]

nice! how thick is the plexiglass and does it have any UV resistant properties?

also, for jerseys is it necessary to keep them in acid free environments?

[BIGSTIG]

metsbats-

GREAT, I am glad you like them. It is very easy to put together. The first one might take you about 1 hour or so, but if you end up doing 8 like I have, you get much faster!! This coming weekend I am going to do a number 9 for a Cubs flannel jersey I just bought, and if anyone can find me a SUTCLIFFE cubs jersey I would be able to make it an even 10!! Just had to throw it out there


costas-

The thickness of the plexiglass I chose to use is .093 also commonly called .100 (they round up)