Results 1 to 10 of 10
Thread: MLB Bat Rules
Hybrid View
-
12-30-2009, 09:39 PM #1
MLB Bat Rules
Where could I find the MLB bat rules pertaining to the whole color thing as well type of wood used, and the companies that MLB allowed to produce bats for the teams.
-
12-30-2009, 09:45 PM #2
- Join Date
- Oct 2009
- Posts
- 478
Re: MLB Bat Rules
You can email BMH on this forum, or try to get a hold of Roy Krasick at MLB.
-
12-31-2009, 02:40 AM #3
Re: MLB Bat Rules
It is rule 1.10 in the MLB Official Rule Book.
For 2010 the rules have not been settled between the lawyers for MLB and the lawyers for the player's union. This will effect color and wood selection...again.Brian Hillerich
-
01-01-2010, 12:57 PM #4
Re: MLB Bat Rules
Grenda -
Just a 'fun fact' I picked up while working for Rawlings (don't hate me Brian it was a job!)...
You'll notice if you look in the MLB Rules that no where does it mention 'corking' a bat or it being illegal to cork a bat.
It does however state that: "The bat must be made out of ONE solid piece of wood".
Elegant in it's simplicity as it automatically covers any 'modifications' to the bat that have to do with hollowing it out and adding a foreign substance as it would no longer be one solid piece of wood.
Also, through out history certain woods have been deemed too 'soft' for MLB use - not because they would break, but because of the 'flex' or 'whip' action caused by the torque of the batter - similar to the difference between a Graphite Shaft Golf Club and a Steel Shaft Golf Club. The big difference being in Golf, you're not hitting the ball back at someone and that flex or whip could dramatically increase the speed (and distance) of the ball off the bat.
Also (and correct me if I am talking 'out of my @$$' here BMH) I believe it was Hillerich and Bradsby that researched using European Beech wood a few years back, but it proved not to be cost effective because of the small number of bats that could be mad from each tree due to 'foreign substances'. While treating and cutting the wood into billetts to make the bats, it was discovered that most of these trees were riddled with piece sof steel - remnants from battles in those forests during WWII including bullets, schrapnel from grenandes, etc. Not only did those substances make it hard to make billetts, they would automatically eliminate the bat from being a 'solid' piece of wood.
All the best -
Chris
-
01-01-2010, 07:09 PM #5
Re: MLB Bat Rules
Hehe, yeah, I ruined a lot of knives on some of those Beech billets. Our "supplier" in Denmark kept upping the price and the quantities he wanted us to buy so we decided it wasn't worth the trouble.
Brian Hillerich
-
01-01-2010, 09:00 PM #6
Re: MLB Bat Rules
I've always wondered why a bat maker couldn't treat the handle and outer inch of the barrel with a hardening agent, and leave the center of the bat untreated. Wouldn't that create a legal corking effect?
Thanks,
Jimmy
Email:
jamesbrandt24 at yahoo.com
-
01-05-2010, 01:12 AM #7