Hello & Welcome to our community. Is this your first visit? Register
Results 1 to 3 of 3
  1. #1
    Senior Member kylehess10's Avatar
    Join Date
    Feb 2006
    Posts
    3,006

    How to make a display for your broken bats for under $2

    I just made this display for a broken bat for under $2 in supplies so I thought I'd pass it along!

    All you need is 2 storage hooks (the ones shaped in a "U") which you can get at Walmart for about 48 cents each, as well as a half-inch wide dowel which you can also get at Walmart for about 50 cents. First, cut the dowel down to make it about a foot long. Then, screw the storage hook into the end of the dowel; but make sure you drill a tiny hole first so when you screw it in the dowel doesn't snap down the middle. I then made a small hole on the shelf in my display case and hot-glued it into place. I used the other hook to simply screw it into the shelf (without any dowel). To make sure the handle doesn't roll around, I placed it inbetween the stoarge hook that's screwed directly to the shelf. I also added a photomatched picture of Casey Kotchman breaking this bat. And there ya go! A broken bat display for under $2! I have also made a nice display for helmets/hats that are exactly like the ones you see on eBay, but with just a couple dollars in supplies so I'll post that also if anybody wants to see it, so just let me know. Here's the finished display for the broken bat:







  2. #2
    Senior Member ironmanfan's Avatar
    Join Date
    Sep 2005
    Posts
    2,234

    Re: How to make a display for your broken bats for under $2

    Kyle, you are very resourceful; nicely done!

  3. #3
    Junior Member
    Join Date
    Sep 2010
    Posts
    12

    Displaying cracked or broken bats?

    I currently have several bats that I want to display but I'm not sure how to go about showing off my cracked and broken bats.
    I have 1 that is completely broken in two pieces and a few others that are cracked pretty good.
    For the broken bat that I have, I used gaffer tape to piece it back together. Gaffer tape is awesome because it doesn't stick like duct tape and can easily be removed. I was also thinking of using the gaffer tape on the other bats to keep the crack from getting bigger. My only concern is that I like things in its original form, but at the same time I do realize that the cracks might continue to grow if I don't do anything about them.

    My question for all of you here on GUU is how do you guys display your cracked or broken bats?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -5. The time now is 02:01 PM.
Powered by vBulletin® Version 4.2.5
Copyright © 2024 vBulletin Solutions Inc. All rights reserved.
vBulletin Skin By: PurevB.com